🎉 Up to 70% Off Selected ItemsShop Sale
[SN JC1516] USED FENDER CUSTOM SHOP / Master Built Series 1957 Stratocaster Relic Fiesta Red By John Cruz [03]
We’ve just received a 2010 Fender Custom Shop Master Built Series 1957 Stratocaster Relic Fiesta Red by John Cruz!
John Cruz joined Fender in 1986. During his early days, which began with mopping floors, he learned the subtle differences in neck shapes across different eras from Harvie Castellum, the master of neck final sanding. In 1993, he was recognized by John Page, one of the founders of the Custom Shop, and became a member of the team.
He was promoted to Master Builder in 2003. The following year, he was entrusted with the sole responsibility of crafting the limited-edition Stevie Ray Vaughan "Number One" Stratocaster, a run of just 100 guitars.
We have received a rare instrument crafted in 2010 by John Cruz, a builder renowned for possessing the highest level of skill and experience in relic finishing!
Based on a 1957 Stratocaster, this guitar features an alder body and a maple neck.
The neck shape is a soft V-shape typical of that era, and it is equipped with 21 vintage-style frets.
The fingerboard features scalloped frets.
The body color is "Fiesta Red."
As this is a relic-style finish, the paint has peeled away to reveal the white undercoat and bare wood in areas such as the elbow cut, and the entire body is covered in scratches and dents that look as if the guitar has been played intensely.
The relic finish has been crafted to a look unique to him, showcasing his exceptional skills within the builder’s workshop.
It is equipped with three original black-bobbin single-coil pickups.
These pickups were crafted by Abigail Ibara, who produced numerous hand-wound pickups over the course of more than 50 years, from her joining the company in 1958 until her retirement in 2013.
This is a guitar that allows you to experience the mature, aged sound of a vintage instrument.
The controls feature a master volume, front pickup tone, and center and rear pickup tone controls, making it easy to play even by today’s standards.
As for the condition, it is very difficult to assess due to the heavy relic finish applied throughout the body, but there are also some scratches that appear to have been added later.
There are signs of repair on the middle pickup, and the soldering at the grommet has been redone.
Additionally, re-soldering is visible around the pot area.
Finished with a rugged, well-worn look that suggests it has been played extensively over the years, this is a truly unique John Cruz guitar!
This is a rare find, so please don’t miss this opportunity!!
Truss Rod: Loose in both tightening and loosening directions
Neck condition: No issues
Frets: 70–80%
Case: Original hard case
Accessories: Certificate of Authenticity, tremolo arm, saddle set screws, manuals
Serial Number: JC1516
Weight: 3.51 kg
* Please note that due to the nature of this product, we are unable to transfer it between stores.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JC1516
Country of Manufacture: USA
Case: Hard case
Accessories: Certificate, arm, etc.
Weight: 3.51 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.4 mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Saddle set screws
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, leveling, saddle set screw replacement
Other: Center pickup wire break
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
John Cruz joined Fender in 1986. During his early days, which began with mopping floors, he learned the subtle differences in neck shapes across different eras from Harvie Castellum, the master of neck final sanding. In 1993, he was recognized by John Page, one of the founders of the Custom Shop, and became a member of the team.
He was promoted to Master Builder in 2003. The following year, he was entrusted with the sole responsibility of crafting the limited-edition Stevie Ray Vaughan "Number One" Stratocaster, a run of just 100 guitars.
We have received a rare instrument crafted in 2010 by John Cruz, a builder renowned for possessing the highest level of skill and experience in relic finishing!
Based on a 1957 Stratocaster, this guitar features an alder body and a maple neck.
The neck shape is a soft V-shape typical of that era, and it is equipped with 21 vintage-style frets.
The fingerboard features scalloped frets.
The body color is "Fiesta Red."
As this is a relic-style finish, the paint has peeled away to reveal the white undercoat and bare wood in areas such as the elbow cut, and the entire body is covered in scratches and dents that look as if the guitar has been played intensely.
The relic finish has been crafted to a look unique to him, showcasing his exceptional skills within the builder’s workshop.
It is equipped with three original black-bobbin single-coil pickups.
These pickups were crafted by Abigail Ibara, who produced numerous hand-wound pickups over the course of more than 50 years, from her joining the company in 1958 until her retirement in 2013.
This is a guitar that allows you to experience the mature, aged sound of a vintage instrument.
The controls feature a master volume, front pickup tone, and center and rear pickup tone controls, making it easy to play even by today’s standards.
As for the condition, it is very difficult to assess due to the heavy relic finish applied throughout the body, but there are also some scratches that appear to have been added later.
There are signs of repair on the middle pickup, and the soldering at the grommet has been redone.
Additionally, re-soldering is visible around the pot area.
Finished with a rugged, well-worn look that suggests it has been played extensively over the years, this is a truly unique John Cruz guitar!
This is a rare find, so please don’t miss this opportunity!!
Truss Rod: Loose in both tightening and loosening directions
Neck condition: No issues
Frets: 70–80%
Case: Original hard case
Accessories: Certificate of Authenticity, tremolo arm, saddle set screws, manuals
Serial Number: JC1516
Weight: 3.51 kg
* Please note that due to the nature of this product, we are unable to transfer it between stores.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JC1516
Country of Manufacture: USA
Case: Hard case
Accessories: Certificate, arm, etc.
Weight: 3.51 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.4 mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Saddle set screws
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, leveling, saddle set screw replacement
Other: Center pickup wire break
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$41.77
[SN JC1516] USED FENDER CUSTOM SHOP / Master Built Series 1957 Stratocaster Relic Fiesta Red By John Cruz [03]—
$41.77
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
We’ve just received a 2010 Fender Custom Shop Master Built Series 1957 Stratocaster Relic Fiesta Red by John Cruz!
John Cruz joined Fender in 1986. During his early days, which began with mopping floors, he learned the subtle differences in neck shapes across different eras from Harvie Castellum, the master of neck final sanding. In 1993, he was recognized by John Page, one of the founders of the Custom Shop, and became a member of the team.
He was promoted to Master Builder in 2003. The following year, he was entrusted with the sole responsibility of crafting the limited-edition Stevie Ray Vaughan "Number One" Stratocaster, a run of just 100 guitars.
We have received a rare instrument crafted in 2010 by John Cruz, a builder renowned for possessing the highest level of skill and experience in relic finishing!
Based on a 1957 Stratocaster, this guitar features an alder body and a maple neck.
The neck shape is a soft V-shape typical of that era, and it is equipped with 21 vintage-style frets.
The fingerboard features scalloped frets.
The body color is "Fiesta Red."
As this is a relic-style finish, the paint has peeled away to reveal the white undercoat and bare wood in areas such as the elbow cut, and the entire body is covered in scratches and dents that look as if the guitar has been played intensely.
The relic finish has been crafted to a look unique to him, showcasing his exceptional skills within the builder’s workshop.
It is equipped with three original black-bobbin single-coil pickups.
These pickups were crafted by Abigail Ibara, who produced numerous hand-wound pickups over the course of more than 50 years, from her joining the company in 1958 until her retirement in 2013.
This is a guitar that allows you to experience the mature, aged sound of a vintage instrument.
The controls feature a master volume, front pickup tone, and center and rear pickup tone controls, making it easy to play even by today’s standards.
As for the condition, it is very difficult to assess due to the heavy relic finish applied throughout the body, but there are also some scratches that appear to have been added later.
There are signs of repair on the middle pickup, and the soldering at the grommet has been redone.
Additionally, re-soldering is visible around the pot area.
Finished with a rugged, well-worn look that suggests it has been played extensively over the years, this is a truly unique John Cruz guitar!
This is a rare find, so please don’t miss this opportunity!!
Truss Rod: Loose in both tightening and loosening directions
Neck condition: No issues
Frets: 70–80%
Case: Original hard case
Accessories: Certificate of Authenticity, tremolo arm, saddle set screws, manuals
Serial Number: JC1516
Weight: 3.51 kg
* Please note that due to the nature of this product, we are unable to transfer it between stores.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JC1516
Country of Manufacture: USA
Case: Hard case
Accessories: Certificate, arm, etc.
Weight: 3.51 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.4 mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Saddle set screws
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, leveling, saddle set screw replacement
Other: Center pickup wire break
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
John Cruz joined Fender in 1986. During his early days, which began with mopping floors, he learned the subtle differences in neck shapes across different eras from Harvie Castellum, the master of neck final sanding. In 1993, he was recognized by John Page, one of the founders of the Custom Shop, and became a member of the team.
He was promoted to Master Builder in 2003. The following year, he was entrusted with the sole responsibility of crafting the limited-edition Stevie Ray Vaughan "Number One" Stratocaster, a run of just 100 guitars.
We have received a rare instrument crafted in 2010 by John Cruz, a builder renowned for possessing the highest level of skill and experience in relic finishing!
Based on a 1957 Stratocaster, this guitar features an alder body and a maple neck.
The neck shape is a soft V-shape typical of that era, and it is equipped with 21 vintage-style frets.
The fingerboard features scalloped frets.
The body color is "Fiesta Red."
As this is a relic-style finish, the paint has peeled away to reveal the white undercoat and bare wood in areas such as the elbow cut, and the entire body is covered in scratches and dents that look as if the guitar has been played intensely.
The relic finish has been crafted to a look unique to him, showcasing his exceptional skills within the builder’s workshop.
It is equipped with three original black-bobbin single-coil pickups.
These pickups were crafted by Abigail Ibara, who produced numerous hand-wound pickups over the course of more than 50 years, from her joining the company in 1958 until her retirement in 2013.
This is a guitar that allows you to experience the mature, aged sound of a vintage instrument.
The controls feature a master volume, front pickup tone, and center and rear pickup tone controls, making it easy to play even by today’s standards.
As for the condition, it is very difficult to assess due to the heavy relic finish applied throughout the body, but there are also some scratches that appear to have been added later.
There are signs of repair on the middle pickup, and the soldering at the grommet has been redone.
Additionally, re-soldering is visible around the pot area.
Finished with a rugged, well-worn look that suggests it has been played extensively over the years, this is a truly unique John Cruz guitar!
This is a rare find, so please don’t miss this opportunity!!
Truss Rod: Loose in both tightening and loosening directions
Neck condition: No issues
Frets: 70–80%
Case: Original hard case
Accessories: Certificate of Authenticity, tremolo arm, saddle set screws, manuals
Serial Number: JC1516
Weight: 3.51 kg
* Please note that due to the nature of this product, we are unable to transfer it between stores.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JC1516
Country of Manufacture: USA
Case: Hard case
Accessories: Certificate, arm, etc.
Weight: 3.51 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.4 mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Saddle set screws
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, leveling, saddle set screw replacement
Other: Center pickup wire break
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
