[SN 502406] USED ATELIER Z / M#265/18p Natural [04]

ATELIER Z Guitar Works M#265/18p Natural

We have received a used "M#265/18p" from the MAGNITUDE series by "Atelier Z," a Japanese brand favored by various artists both in Japan and abroad.

The M#265 is the 5-string version of the M#245, a model favored by players who frequently use slap technique.
It features the classic sound character of a jazz bass, capable of handling all musical styles, while inheriting the clear projection characteristic of vintage models. It also successfully brings out the distinct attack of slap playing with clarity. This model is crafted from materials that can keep pace with the wide dynamic range of high-end amplifiers.

This JB-type model, equipped with an active circuit, features a two-piece ash body and a one-piece maple neck, connected via a four-point detachable joint.
The nut width is 47.5 mm, with a 34-inch long scale, a 400R fingerboard radius, block position markers, and 21 medium-jumbo frets.
The “18p” in the model name refers to a string-to-string width of 18 mm.
The hardware is primarily chrome; it is equipped with Gotoh GB528-5 tuners and an ATELIER Z BB518 bridge.

It is equipped with two “ATELIER Z JBZ-5/18p” pickups and a “Bartolini XTCT” preamp. Controls include Master Volume (Balance), Master Tone, Active/Passive Switch, Middle Boost, Treble Control, and Bass Control.

The guitar is in good overall condition; the truss rod rotates 60 degrees in both directions, and approximately 80% of the frets remain.

The finish is “Natural,” which highlights the ash grain, with a glossy finish and an acrylic clear pickguard.

S/N: 502406
Weight: 4.25 kg
Accessories: Non-original soft case

-Neck-
Scale: 34" (864 mm)
Neck Material

-Fingerboard-
Material Solid Maple
Fingerboard Radius 400R
Fret Dimensions W2.7mm/H1.0mm
Frets 21 frets
Nut Material Bone
Nut Width 47.5mm
Finish Gloss. Neck Back = Matte

-Body-
Body Material Ash 2P
Body Shape JB "M" Type (Original "J" Body)
Body Finish Gloss

-Hardware-
Tuning Keys GOTOH GB528
Bridge 18-string ATELIER Z BB518 (18 mm)
Finish Chrome
Pickguard Clear Acrylic 3mm
Control Panel Clear Acrylic, 3mm
Control Knobs ATELIER Z ZAK-1500 ZAK-2000
Neck Plate ATELIER Z 4-Point Plate
Electronics Pickups 18P=ATELIER Z JBZ-5/18Px2
Preamp Bartolini XTCT
Controls M’Vol, BAL, M’Tone/sw (Active ON/OFF), Treble/Bass/Middle Boost (There is a click at the 50% boost position)
Color Natural

Condition: B+: Has some minor scratches, but is in good working condition for normal use

Serial Number: 502406
Case: Non-original soft case
Accessories: Non-original soft case
Weight: 4.25 kg

* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any information provided regarding the truss rod, remaining fret life, string action, etc., was measured by our staff during setup; however, these specifications are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.