š Up to 70% Off Selected ItemsShop Sale
[SN 127260] USED Gibson / 1973 Les Paul Custom [05]
A 1973 Gibson Les Paul Custom has just arrived!!
This is a 1973 model with serial number 127260 and pot date 1377320.
It features a pancake body construction with a maple top and mahogany body, sandwiched with a thin layer of maple. The wood materials include a 3-piece mahogany neck and an ebony fingerboard. The Gibson logo on the headstock features a closed "o," and the absence of a dot on the "i" is one of the most distinctive characteristics of this era. The neck has a volute design and is stamped "Made in USA."
The neck joint is a short tenon. It is equipped with two sticker-numbered PAF (T-top) pickups. The pots are from 1973. Although the year is not visible on some of the pots, we have determined that they are all original. The capacitors are also original.
Replaced parts include the nut, frets, and some screws. While the tailpiece matches the era, there is a significant difference in color between it and the bridge, so it is possible that the tailpiece was sourced from a different instrument. Additionally, heat-shrink tubing has been wrapped around the lead wire of the rear pickup, but this does not currently pose any issues.
Regarding the condition, there are some dents and scratches, but the truss rod has plenty of adjustment left, and playability is good.
We hope you will consider this opportunity.
* We sincerely apologize, but due to the nature of this product, we are unable to accommodate requests for pickup at other Ishibashi Gakki locations or for shipping.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: USA
Year of Manufacture: 1973
Serial Number: 127260
Case: Hard Case / Genuine
Weight: 4.41 kg
Fret Wear: Approximately 70%ā80% remaining
Truss Rod: Ample adjustment range in both tightening and loosening directions
Neck Condition: Good
Notes: The only accessories included are those shown in the photos.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product, and we list it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
This is a 1973 model with serial number 127260 and pot date 1377320.
It features a pancake body construction with a maple top and mahogany body, sandwiched with a thin layer of maple. The wood materials include a 3-piece mahogany neck and an ebony fingerboard. The Gibson logo on the headstock features a closed "o," and the absence of a dot on the "i" is one of the most distinctive characteristics of this era. The neck has a volute design and is stamped "Made in USA."
The neck joint is a short tenon. It is equipped with two sticker-numbered PAF (T-top) pickups. The pots are from 1973. Although the year is not visible on some of the pots, we have determined that they are all original. The capacitors are also original.
Replaced parts include the nut, frets, and some screws. While the tailpiece matches the era, there is a significant difference in color between it and the bridge, so it is possible that the tailpiece was sourced from a different instrument. Additionally, heat-shrink tubing has been wrapped around the lead wire of the rear pickup, but this does not currently pose any issues.
Regarding the condition, there are some dents and scratches, but the truss rod has plenty of adjustment left, and playability is good.
We hope you will consider this opportunity.
* We sincerely apologize, but due to the nature of this product, we are unable to accommodate requests for pickup at other Ishibashi Gakki locations or for shipping.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: USA
Year of Manufacture: 1973
Serial Number: 127260
Case: Hard Case / Genuine
Weight: 4.41 kg
Fret Wear: Approximately 70%ā80% remaining
Truss Rod: Ample adjustment range in both tightening and loosening directions
Neck Condition: Good
Notes: The only accessories included are those shown in the photos.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product, and we list it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
$25.06
Original: $71.61
-65%[SN 127260] USED Gibson / 1973 Les Paul Custom [05]ā
$71.61
$25.06Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A 1973 Gibson Les Paul Custom has just arrived!!
This is a 1973 model with serial number 127260 and pot date 1377320.
It features a pancake body construction with a maple top and mahogany body, sandwiched with a thin layer of maple. The wood materials include a 3-piece mahogany neck and an ebony fingerboard. The Gibson logo on the headstock features a closed "o," and the absence of a dot on the "i" is one of the most distinctive characteristics of this era. The neck has a volute design and is stamped "Made in USA."
The neck joint is a short tenon. It is equipped with two sticker-numbered PAF (T-top) pickups. The pots are from 1973. Although the year is not visible on some of the pots, we have determined that they are all original. The capacitors are also original.
Replaced parts include the nut, frets, and some screws. While the tailpiece matches the era, there is a significant difference in color between it and the bridge, so it is possible that the tailpiece was sourced from a different instrument. Additionally, heat-shrink tubing has been wrapped around the lead wire of the rear pickup, but this does not currently pose any issues.
Regarding the condition, there are some dents and scratches, but the truss rod has plenty of adjustment left, and playability is good.
We hope you will consider this opportunity.
* We sincerely apologize, but due to the nature of this product, we are unable to accommodate requests for pickup at other Ishibashi Gakki locations or for shipping.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: USA
Year of Manufacture: 1973
Serial Number: 127260
Case: Hard Case / Genuine
Weight: 4.41 kg
Fret Wear: Approximately 70%ā80% remaining
Truss Rod: Ample adjustment range in both tightening and loosening directions
Neck Condition: Good
Notes: The only accessories included are those shown in the photos.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product, and we list it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
This is a 1973 model with serial number 127260 and pot date 1377320.
It features a pancake body construction with a maple top and mahogany body, sandwiched with a thin layer of maple. The wood materials include a 3-piece mahogany neck and an ebony fingerboard. The Gibson logo on the headstock features a closed "o," and the absence of a dot on the "i" is one of the most distinctive characteristics of this era. The neck has a volute design and is stamped "Made in USA."
The neck joint is a short tenon. It is equipped with two sticker-numbered PAF (T-top) pickups. The pots are from 1973. Although the year is not visible on some of the pots, we have determined that they are all original. The capacitors are also original.
Replaced parts include the nut, frets, and some screws. While the tailpiece matches the era, there is a significant difference in color between it and the bridge, so it is possible that the tailpiece was sourced from a different instrument. Additionally, heat-shrink tubing has been wrapped around the lead wire of the rear pickup, but this does not currently pose any issues.
Regarding the condition, there are some dents and scratches, but the truss rod has plenty of adjustment left, and playability is good.
We hope you will consider this opportunity.
* We sincerely apologize, but due to the nature of this product, we are unable to accommodate requests for pickup at other Ishibashi Gakki locations or for shipping.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: USA
Year of Manufacture: 1973
Serial Number: 127260
Case: Hard Case / Genuine
Weight: 4.41 kg
Fret Wear: Approximately 70%ā80% remaining
Truss Rod: Ample adjustment range in both tightening and loosening directions
Neck Condition: Good
Notes: The only accessories included are those shown in the photos.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product, and we list it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
