🎉 Up to 70% Off Selected ItemsShop Sale
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9
Product image 10
Product image 11
Product image 12
Product image 13
Product image 14
Product image 15
HomeStore

[SN MIJ S031493] USED FENDER JAPAN / ST67-95 VWH [06]

[SN MIJ S031493] USED FENDER JAPAN / ST67-95 VWH [06]

We've just received a used FENDER JAPAN ST67-95 VWH!
Manufactured by Fujigen from 1994 to 1995.
A Japanese-made Stratocaster that recreates the 1967 model with a large headstock.
Features an alder body with a maple neck and fingerboard.
Equipped with three USA-made ST-VINTAGE pickups.
The controls have been modified to include volume, front & center tone, and rear tone.
There is a tobacco smell throughout the guitar.
The selector switch has been replaced with a 5-way model.
The center tone pot has also been replaced.
There are discoloration-like stains across the entire body. There is a dent on the back of the body.
While there are some minor scratches, dents, and tarnish on the metal parts, this is still a guitar that can be played.
It has been cleaned and fully adjusted since arrival, and there are no issues with its playability.
Condition: B+: Some minor scratches, but no issues for normal use

Serial Number: MIJ S031493
Country of Manufacture: Japan
Case: Soft case (has a tobacco smell)
Accessories: Arm
Weight: 3.52 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.5 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.1 mm
Scale: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings at setup: .009-.042 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.

* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.56

Original: $4.46

-65%
[SN MIJ S031493] USED FENDER JAPAN / ST67-95 VWH [06]

$4.46

$1.56

Product Information

Shipping & Returns

Description

We've just received a used FENDER JAPAN ST67-95 VWH!
Manufactured by Fujigen from 1994 to 1995.
A Japanese-made Stratocaster that recreates the 1967 model with a large headstock.
Features an alder body with a maple neck and fingerboard.
Equipped with three USA-made ST-VINTAGE pickups.
The controls have been modified to include volume, front & center tone, and rear tone.
There is a tobacco smell throughout the guitar.
The selector switch has been replaced with a 5-way model.
The center tone pot has also been replaced.
There are discoloration-like stains across the entire body. There is a dent on the back of the body.
While there are some minor scratches, dents, and tarnish on the metal parts, this is still a guitar that can be played.
It has been cleaned and fully adjusted since arrival, and there are no issues with its playability.
Condition: B+: Some minor scratches, but no issues for normal use

Serial Number: MIJ S031493
Country of Manufacture: Japan
Case: Soft case (has a tobacco smell)
Accessories: Arm
Weight: 3.52 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.5 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.1 mm
Scale: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings at setup: .009-.042 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.

* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
[SN MIJ S031493] USED FENDER JAPAN / ST67-95 VWH [06] | Ishibashi Music Corporation