š Up to 70% Off Selected ItemsShop Sale
[SN CIJ/P011641] USED FENDER JAPAN / JG66-98D 3-Tone Sunburst [06]
The Fender Japan JG66-98D has arrived.
This model was custom-ordered by music stores in the 2000s. Based on the serial number, it was manufactured between 1999 and 2002.
Based on a 1966 Jaguar, this guitar features a two-humbucker configuration and a Tun-O-Matic bridge, making it a K.C.-style model.
The tremolo arm is missing. The bridge and strap pins appear to have been replaced at some point.
There is tarnish on the metal parts, scratches on the body buckle, numerous chips in the finish, and noticeable playing wear on the pickguard.
There are signs of wear throughout, including an impact mark on the headstock tip and wear on the 2nd fret of the fingerboard.
The frets have been leveled and are now flat.
It has been cleaned and fully adjusted since arrival.
Condition Grade: B: Shows significant wear and scratches, but is in good working condition for normal use
Serial Number: CIJ/P011641
Country of Manufacture: Japan
Case: Hard Case
Weight: 3.86 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.6 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
This model was custom-ordered by music stores in the 2000s. Based on the serial number, it was manufactured between 1999 and 2002.
Based on a 1966 Jaguar, this guitar features a two-humbucker configuration and a Tun-O-Matic bridge, making it a K.C.-style model.
The tremolo arm is missing. The bridge and strap pins appear to have been replaced at some point.
There is tarnish on the metal parts, scratches on the body buckle, numerous chips in the finish, and noticeable playing wear on the pickguard.
There are signs of wear throughout, including an impact mark on the headstock tip and wear on the 2nd fret of the fingerboard.
The frets have been leveled and are now flat.
It has been cleaned and fully adjusted since arrival.
Condition Grade: B: Shows significant wear and scratches, but is in good working condition for normal use
Serial Number: CIJ/P011641
Country of Manufacture: Japan
Case: Hard Case
Weight: 3.86 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.6 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$9.24
[SN CIJ/P011641] USED FENDER JAPAN / JG66-98D 3-Tone Sunburst [06]ā
$9.24
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fender Japan JG66-98D has arrived.
This model was custom-ordered by music stores in the 2000s. Based on the serial number, it was manufactured between 1999 and 2002.
Based on a 1966 Jaguar, this guitar features a two-humbucker configuration and a Tun-O-Matic bridge, making it a K.C.-style model.
The tremolo arm is missing. The bridge and strap pins appear to have been replaced at some point.
There is tarnish on the metal parts, scratches on the body buckle, numerous chips in the finish, and noticeable playing wear on the pickguard.
There are signs of wear throughout, including an impact mark on the headstock tip and wear on the 2nd fret of the fingerboard.
The frets have been leveled and are now flat.
It has been cleaned and fully adjusted since arrival.
Condition Grade: B: Shows significant wear and scratches, but is in good working condition for normal use
Serial Number: CIJ/P011641
Country of Manufacture: Japan
Case: Hard Case
Weight: 3.86 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.6 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
This model was custom-ordered by music stores in the 2000s. Based on the serial number, it was manufactured between 1999 and 2002.
Based on a 1966 Jaguar, this guitar features a two-humbucker configuration and a Tun-O-Matic bridge, making it a K.C.-style model.
The tremolo arm is missing. The bridge and strap pins appear to have been replaced at some point.
There is tarnish on the metal parts, scratches on the body buckle, numerous chips in the finish, and noticeable playing wear on the pickguard.
There are signs of wear throughout, including an impact mark on the headstock tip and wear on the 2nd fret of the fingerboard.
The frets have been leveled and are now flat.
It has been cleaned and fully adjusted since arrival.
Condition Grade: B: Shows significant wear and scratches, but is in good working condition for normal use
Serial Number: CIJ/P011641
Country of Manufacture: Japan
Case: Hard Case
Weight: 3.86 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.6 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
