š Up to 70% Off Selected ItemsShop Sale
[SN CIJ/S025622] USED FENDER JAPAN / ST72-US Black [06]
We've just received a used FENDER JAPAN ST72-US in Black!
Assembled in Japan from 2006 to 2008.
A Stratocaster that recreates the 1972 specifications, featuring a large headstock, a bullet truss rod nut, and a three-point neck joint.
Features a basswood body with a maple neck and fingerboard.
Equipped with three USA-made ST-VINTAGE pickups.
There is some sticker burn on the back panel.
There are a few dents on the top, sides, and back of the body.
While there are other minor scratches, dents, and some tarnish on the metal parts, this is still a fully playable instrument.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: CIJ/S025622
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.47 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
Assembled in Japan from 2006 to 2008.
A Stratocaster that recreates the 1972 specifications, featuring a large headstock, a bullet truss rod nut, and a three-point neck joint.
Features a basswood body with a maple neck and fingerboard.
Equipped with three USA-made ST-VINTAGE pickups.
There is some sticker burn on the back panel.
There are a few dents on the top, sides, and back of the body.
While there are other minor scratches, dents, and some tarnish on the metal parts, this is still a fully playable instrument.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: CIJ/S025622
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.47 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
$4.06
[SN CIJ/S025622] USED FENDER JAPAN / ST72-US Black [06]ā
$4.06
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
We've just received a used FENDER JAPAN ST72-US in Black!
Assembled in Japan from 2006 to 2008.
A Stratocaster that recreates the 1972 specifications, featuring a large headstock, a bullet truss rod nut, and a three-point neck joint.
Features a basswood body with a maple neck and fingerboard.
Equipped with three USA-made ST-VINTAGE pickups.
There is some sticker burn on the back panel.
There are a few dents on the top, sides, and back of the body.
While there are other minor scratches, dents, and some tarnish on the metal parts, this is still a fully playable instrument.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: CIJ/S025622
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.47 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
Assembled in Japan from 2006 to 2008.
A Stratocaster that recreates the 1972 specifications, featuring a large headstock, a bullet truss rod nut, and a three-point neck joint.
Features a basswood body with a maple neck and fingerboard.
Equipped with three USA-made ST-VINTAGE pickups.
There is some sticker burn on the back panel.
There are a few dents on the top, sides, and back of the body.
While there are other minor scratches, dents, and some tarnish on the metal parts, this is still a fully playable instrument.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: CIJ/S025622
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.47 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
