š Up to 70% Off Selected ItemsShop Sale
[SN S071022] USED FENDER JAPAN / MG65-86 MOD VWH [06]
We've just received a used FENDER JAPAN MG65-86 MOD VWH!
Assembled in Japan from 2006 to 2008.
A Mustang designed to recreate the 1965 model.
Features a poplar body, maple neck, and rosewood fingerboard.
Both pickups have been replaced with Seymour Duncan Quarter Pound models.
The tremolo arm is missing.
There is a dent on the side of the body caused by a large impact.
There are dents and scratches on the lower part of the body.
While there are other minor scratches, dents, and some tarnish on the metal parts, this guitar is still very much playable.
It has been cleaned and fully adjusted since arrival, and plays perfectly.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: S071022
Country of Manufacture: Japan
Case: Soft case
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.2 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 610 mm (24")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Assembled in Japan from 2006 to 2008.
A Mustang designed to recreate the 1965 model.
Features a poplar body, maple neck, and rosewood fingerboard.
Both pickups have been replaced with Seymour Duncan Quarter Pound models.
The tremolo arm is missing.
There is a dent on the side of the body caused by a large impact.
There are dents and scratches on the lower part of the body.
While there are other minor scratches, dents, and some tarnish on the metal parts, this guitar is still very much playable.
It has been cleaned and fully adjusted since arrival, and plays perfectly.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: S071022
Country of Manufacture: Japan
Case: Soft case
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.2 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 610 mm (24")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.53
Original: $4.38
-65%[SN S071022] USED FENDER JAPAN / MG65-86 MOD VWH [06]ā
$4.38
$1.53Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
We've just received a used FENDER JAPAN MG65-86 MOD VWH!
Assembled in Japan from 2006 to 2008.
A Mustang designed to recreate the 1965 model.
Features a poplar body, maple neck, and rosewood fingerboard.
Both pickups have been replaced with Seymour Duncan Quarter Pound models.
The tremolo arm is missing.
There is a dent on the side of the body caused by a large impact.
There are dents and scratches on the lower part of the body.
While there are other minor scratches, dents, and some tarnish on the metal parts, this guitar is still very much playable.
It has been cleaned and fully adjusted since arrival, and plays perfectly.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: S071022
Country of Manufacture: Japan
Case: Soft case
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.2 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 610 mm (24")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Assembled in Japan from 2006 to 2008.
A Mustang designed to recreate the 1965 model.
Features a poplar body, maple neck, and rosewood fingerboard.
Both pickups have been replaced with Seymour Duncan Quarter Pound models.
The tremolo arm is missing.
There is a dent on the side of the body caused by a large impact.
There are dents and scratches on the lower part of the body.
While there are other minor scratches, dents, and some tarnish on the metal parts, this guitar is still very much playable.
It has been cleaned and fully adjusted since arrival, and plays perfectly.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: S071022
Country of Manufacture: Japan
Case: Soft case
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.2 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 610 mm (24")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
