🎉 Up to 70% Off Selected ItemsShop Sale
[SN MIJ/G012506] USED FENDER JAPAN / ST-650SPL 3TS [06]
We’ve received a rare model, the ST-650SPL.
Although it is a Fender Japan model manufactured by Fujigen, it strongly reflects the characteristics of the American Standard series, such as a 22-fret fingerboard and a two-point tremolo system.
The back panel and arm are missing. There are dents on the headstock, paint chips, and a partially missing logo.
The pickup covers have discoloration, and the pickguard has numerous play marks. There is a noticeable dent and paint chip on the back of the neck at the 9th fret.
The body also shows signs of overall wear, including paint cracks, dents, and numerous scuffs at the neck joint, as well as paint damage along the contour.
It has been cleaned, fully adjusted, and had its frets leveled since arrival.
Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use
Serial Number: MIJ/G012506
Case: Soft case
Weight: 3.53 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Height: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.1 mm at the 12th fret
String height (treble side): 1.6 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Although it is a Fender Japan model manufactured by Fujigen, it strongly reflects the characteristics of the American Standard series, such as a 22-fret fingerboard and a two-point tremolo system.
The back panel and arm are missing. There are dents on the headstock, paint chips, and a partially missing logo.
The pickup covers have discoloration, and the pickguard has numerous play marks. There is a noticeable dent and paint chip on the back of the neck at the 9th fret.
The body also shows signs of overall wear, including paint cracks, dents, and numerous scuffs at the neck joint, as well as paint damage along the contour.
It has been cleaned, fully adjusted, and had its frets leveled since arrival.
Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use
Serial Number: MIJ/G012506
Case: Soft case
Weight: 3.53 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Height: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.1 mm at the 12th fret
String height (treble side): 1.6 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.42
Original: $4.06
-65%[SN MIJ/G012506] USED FENDER JAPAN / ST-650SPL 3TS [06]—
$4.06
$1.42Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
We’ve received a rare model, the ST-650SPL.
Although it is a Fender Japan model manufactured by Fujigen, it strongly reflects the characteristics of the American Standard series, such as a 22-fret fingerboard and a two-point tremolo system.
The back panel and arm are missing. There are dents on the headstock, paint chips, and a partially missing logo.
The pickup covers have discoloration, and the pickguard has numerous play marks. There is a noticeable dent and paint chip on the back of the neck at the 9th fret.
The body also shows signs of overall wear, including paint cracks, dents, and numerous scuffs at the neck joint, as well as paint damage along the contour.
It has been cleaned, fully adjusted, and had its frets leveled since arrival.
Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use
Serial Number: MIJ/G012506
Case: Soft case
Weight: 3.53 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Height: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.1 mm at the 12th fret
String height (treble side): 1.6 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Although it is a Fender Japan model manufactured by Fujigen, it strongly reflects the characteristics of the American Standard series, such as a 22-fret fingerboard and a two-point tremolo system.
The back panel and arm are missing. There are dents on the headstock, paint chips, and a partially missing logo.
The pickup covers have discoloration, and the pickguard has numerous play marks. There is a noticeable dent and paint chip on the back of the neck at the 9th fret.
The body also shows signs of overall wear, including paint cracks, dents, and numerous scuffs at the neck joint, as well as paint damage along the contour.
It has been cleaned, fully adjusted, and had its frets leveled since arrival.
Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use
Serial Number: MIJ/G012506
Case: Soft case
Weight: 3.53 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Height: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.1 mm at the 12th fret
String height (treble side): 1.6 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
