🎉 Up to 70% Off Selected ItemsShop Sale
[SN 1063545] USED Martin / 000M Mahogany Auditorium w/L.R.Baggs iBeam Passive (Made in USA / 2005) [08]
Used USA-made Martin entry-level model in stock!
Made at the Nazareth factory, USA.
This model was produced from 1997-2008.
Thin and narrow triple O body with solid spruce top and mahogany side and back.
Select hardwood Neck with approx. 42.5mm nut width and 25.4" long scale is covered with rosewood fingerboard.
A-frame bracing and all satin finish on both Body/Neck.
* A strap pin is added at the Neck heel cap.
* Passive piezo pickup (L.R. Baggs iBeam Passive) is retrofitted and the end is out jacked.
Since the output is quite small, it must be used with a separate external preamp.
* The pickguard has probably been reapplied or replaced in the past.
* Bridge pins have been replaced.
* Neck breakage has been corrected, but is clean. (Over lacquer)
Fret grind, cleaning, string replacement, and rod adjustment have been done after arrival.
The truss rod has been checked up to 60 degrees to the left and right, and there is no problem.
There are some sticker or tape removal marks on the top of the body.
There are some minor scratches, dents, and scratches scattered throughout.
There is a gap between the binding and the body due to age.
The back of the neck has become shiny due to playing.
There are some signs of use and repair history, but the playability is good.
Even though it is an entry-level model, it is indeed a USA-made Martin!
The rich midrange resonates pleasantly!
Item rank: B+: Some scratches, but no problems in normal use.
Serial: 1063545
Accessories: Genuine hard case
* Case exterior is scratched and slightly peeling.
* Neck has been corrected for breakage in the past, so there is no warranty for used Neck.
Made at the Nazareth factory, USA.
This model was produced from 1997-2008.
Thin and narrow triple O body with solid spruce top and mahogany side and back.
Select hardwood Neck with approx. 42.5mm nut width and 25.4" long scale is covered with rosewood fingerboard.
A-frame bracing and all satin finish on both Body/Neck.
* A strap pin is added at the Neck heel cap.
* Passive piezo pickup (L.R. Baggs iBeam Passive) is retrofitted and the end is out jacked.
Since the output is quite small, it must be used with a separate external preamp.
* The pickguard has probably been reapplied or replaced in the past.
* Bridge pins have been replaced.
* Neck breakage has been corrected, but is clean. (Over lacquer)
Fret grind, cleaning, string replacement, and rod adjustment have been done after arrival.
The truss rod has been checked up to 60 degrees to the left and right, and there is no problem.
There are some sticker or tape removal marks on the top of the body.
There are some minor scratches, dents, and scratches scattered throughout.
There is a gap between the binding and the body due to age.
The back of the neck has become shiny due to playing.
There are some signs of use and repair history, but the playability is good.
Even though it is an entry-level model, it is indeed a USA-made Martin!
The rich midrange resonates pleasantly!
Item rank: B+: Some scratches, but no problems in normal use.
Serial: 1063545
Accessories: Genuine hard case
* Case exterior is scratched and slightly peeling.
* Neck has been corrected for breakage in the past, so there is no warranty for used Neck.
$4.58
[SN 1063545] USED Martin / 000M Mahogany Auditorium w/L.R.Baggs iBeam Passive (Made in USA / 2005) [08]—
$4.58
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Used USA-made Martin entry-level model in stock!
Made at the Nazareth factory, USA.
This model was produced from 1997-2008.
Thin and narrow triple O body with solid spruce top and mahogany side and back.
Select hardwood Neck with approx. 42.5mm nut width and 25.4" long scale is covered with rosewood fingerboard.
A-frame bracing and all satin finish on both Body/Neck.
* A strap pin is added at the Neck heel cap.
* Passive piezo pickup (L.R. Baggs iBeam Passive) is retrofitted and the end is out jacked.
Since the output is quite small, it must be used with a separate external preamp.
* The pickguard has probably been reapplied or replaced in the past.
* Bridge pins have been replaced.
* Neck breakage has been corrected, but is clean. (Over lacquer)
Fret grind, cleaning, string replacement, and rod adjustment have been done after arrival.
The truss rod has been checked up to 60 degrees to the left and right, and there is no problem.
There are some sticker or tape removal marks on the top of the body.
There are some minor scratches, dents, and scratches scattered throughout.
There is a gap between the binding and the body due to age.
The back of the neck has become shiny due to playing.
There are some signs of use and repair history, but the playability is good.
Even though it is an entry-level model, it is indeed a USA-made Martin!
The rich midrange resonates pleasantly!
Item rank: B+: Some scratches, but no problems in normal use.
Serial: 1063545
Accessories: Genuine hard case
* Case exterior is scratched and slightly peeling.
* Neck has been corrected for breakage in the past, so there is no warranty for used Neck.
Made at the Nazareth factory, USA.
This model was produced from 1997-2008.
Thin and narrow triple O body with solid spruce top and mahogany side and back.
Select hardwood Neck with approx. 42.5mm nut width and 25.4" long scale is covered with rosewood fingerboard.
A-frame bracing and all satin finish on both Body/Neck.
* A strap pin is added at the Neck heel cap.
* Passive piezo pickup (L.R. Baggs iBeam Passive) is retrofitted and the end is out jacked.
Since the output is quite small, it must be used with a separate external preamp.
* The pickguard has probably been reapplied or replaced in the past.
* Bridge pins have been replaced.
* Neck breakage has been corrected, but is clean. (Over lacquer)
Fret grind, cleaning, string replacement, and rod adjustment have been done after arrival.
The truss rod has been checked up to 60 degrees to the left and right, and there is no problem.
There are some sticker or tape removal marks on the top of the body.
There are some minor scratches, dents, and scratches scattered throughout.
There is a gap between the binding and the body due to age.
The back of the neck has become shiny due to playing.
There are some signs of use and repair history, but the playability is good.
Even though it is an entry-level model, it is indeed a USA-made Martin!
The rich midrange resonates pleasantly!
Item rank: B+: Some scratches, but no problems in normal use.
Serial: 1063545
Accessories: Genuine hard case
* Case exterior is scratched and slightly peeling.
* Neck has been corrected for breakage in the past, so there is no warranty for used Neck.
