🎉 Up to 70% Off Selected ItemsShop Sale
[SN 20077] USED dragonfly / Premero STM ASH/2P Pink/Natural [3.48 kg] Dragonfly Premero [08]
The Dragonfly PREMERO is a standard-tuning model that brings to life the vision of Tatsuaki Totani, CEO of HARRY’S ENGINEERING (the company behind Dragonfly), and the style sought by guitarist PABRO—known not only for “Pay money To my Pain” and his own project “PABLO” but also for his extensive support of other artists.
Featuring a compact light ash body, a U-shaped maple neck, a maple fingerboard, and a 648mm scale, the pickup configuration consists of a dfs-1/1R/dfh-5B in an S-S-H layout. It employs a two-knob system with front and center volume controls (250KΩ) and a rear volume control (500KΩ), and is equipped with 510TS-FE1 and Gotoh (STM) hardware.
This model features an impressive look and reflects the attention to detail honed in professional settings. Its appeal lies in its playability, the natural tone of the pickups, and its diverse range of sound variations.
Although there are some signs of use (scratches, wipe marks, picking marks on the pickguard film, etc.), it is in good condition.
It was set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, and string height adjustment). The frets are at a height that poses no issues for playing, and the truss rod can be adjusted in both tightening and loosening directions; it has been tested to operate up to ±60° and is in good working order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 20077
Country of Manufacture: Japan
Case: Soft case (non-original)
Accessories: Tremolo arm, spec sheet
Weight: 3.48 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
Nut width: 42mm
Scale: 648mm (25.5")
Radius: 300R
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Featuring a compact light ash body, a U-shaped maple neck, a maple fingerboard, and a 648mm scale, the pickup configuration consists of a dfs-1/1R/dfh-5B in an S-S-H layout. It employs a two-knob system with front and center volume controls (250KΩ) and a rear volume control (500KΩ), and is equipped with 510TS-FE1 and Gotoh (STM) hardware.
This model features an impressive look and reflects the attention to detail honed in professional settings. Its appeal lies in its playability, the natural tone of the pickups, and its diverse range of sound variations.
Although there are some signs of use (scratches, wipe marks, picking marks on the pickguard film, etc.), it is in good condition.
It was set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, and string height adjustment). The frets are at a height that poses no issues for playing, and the truss rod can be adjusted in both tightening and loosening directions; it has been tested to operate up to ±60° and is in good working order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 20077
Country of Manufacture: Japan
Case: Soft case (non-original)
Accessories: Tremolo arm, spec sheet
Weight: 3.48 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
Nut width: 42mm
Scale: 648mm (25.5")
Radius: 300R
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$8.04
[SN 20077] USED dragonfly / Premero STM ASH/2P Pink/Natural [3.48 kg] Dragonfly Premero [08]—
$8.04
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Dragonfly PREMERO is a standard-tuning model that brings to life the vision of Tatsuaki Totani, CEO of HARRY’S ENGINEERING (the company behind Dragonfly), and the style sought by guitarist PABRO—known not only for “Pay money To my Pain” and his own project “PABLO” but also for his extensive support of other artists.
Featuring a compact light ash body, a U-shaped maple neck, a maple fingerboard, and a 648mm scale, the pickup configuration consists of a dfs-1/1R/dfh-5B in an S-S-H layout. It employs a two-knob system with front and center volume controls (250KΩ) and a rear volume control (500KΩ), and is equipped with 510TS-FE1 and Gotoh (STM) hardware.
This model features an impressive look and reflects the attention to detail honed in professional settings. Its appeal lies in its playability, the natural tone of the pickups, and its diverse range of sound variations.
Although there are some signs of use (scratches, wipe marks, picking marks on the pickguard film, etc.), it is in good condition.
It was set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, and string height adjustment). The frets are at a height that poses no issues for playing, and the truss rod can be adjusted in both tightening and loosening directions; it has been tested to operate up to ±60° and is in good working order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 20077
Country of Manufacture: Japan
Case: Soft case (non-original)
Accessories: Tremolo arm, spec sheet
Weight: 3.48 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
Nut width: 42mm
Scale: 648mm (25.5")
Radius: 300R
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Featuring a compact light ash body, a U-shaped maple neck, a maple fingerboard, and a 648mm scale, the pickup configuration consists of a dfs-1/1R/dfh-5B in an S-S-H layout. It employs a two-knob system with front and center volume controls (250KΩ) and a rear volume control (500KΩ), and is equipped with 510TS-FE1 and Gotoh (STM) hardware.
This model features an impressive look and reflects the attention to detail honed in professional settings. Its appeal lies in its playability, the natural tone of the pickups, and its diverse range of sound variations.
Although there are some signs of use (scratches, wipe marks, picking marks on the pickguard film, etc.), it is in good condition.
It was set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, and string height adjustment). The frets are at a height that poses no issues for playing, and the truss rod can be adjusted in both tightening and loosening directions; it has been tested to operate up to ±60° and is in good working order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 20077
Country of Manufacture: Japan
Case: Soft case (non-original)
Accessories: Tremolo arm, spec sheet
Weight: 3.48 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
Nut width: 42mm
Scale: 648mm (25.5")
Radius: 300R
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
