🎉 Up to 70% Off Selected ItemsShop Sale
[SN S703948] USED Fender / Musicmaster Black 1977 [10]
A guitar that truly captures the distinctive bite of a vintage Fender!
The 1977 Musicmaster in Black has arrived!
The straightforward sound is a hallmark of its simple 1-pickup, 1-volume, 1-tone circuit
It delivers solid low-end punch and a sound that completely avoids the lackluster quality often associated with short-scale guitars. Truly a vintage Fender through and through.
Based on the pot dates, these were manufactured in 1977, and both are original.
The serial number on the pickguard matches the body, and aside from the jack, strap pins, and string retainer, everything else appears to be original.
There are some stickers on the back of the body and a paint chip on the right edge caused by an impact mark, but it has been cleaned and set up and is in pristine condition.
Vintage Fender guitars are becoming more expensive every year. Why not take advantage of this opportunity?
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: S703948
Year of Manufacture: 1977
Country of Manufacture: USA
Case: Hard Case
Accessories: Hard case key
Weight: 3.16 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.6 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 23.6 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Strap pins have been replaced, string retainer has been replaced, jack has been replaced with a domestic part.
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling
Other: The holes for the two original string retainers have been filled, and new string retainers have been installed on the 1st and 2nd strings.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The 1977 Musicmaster in Black has arrived!
The straightforward sound is a hallmark of its simple 1-pickup, 1-volume, 1-tone circuit
It delivers solid low-end punch and a sound that completely avoids the lackluster quality often associated with short-scale guitars. Truly a vintage Fender through and through.
Based on the pot dates, these were manufactured in 1977, and both are original.
The serial number on the pickguard matches the body, and aside from the jack, strap pins, and string retainer, everything else appears to be original.
There are some stickers on the back of the body and a paint chip on the right edge caused by an impact mark, but it has been cleaned and set up and is in pristine condition.
Vintage Fender guitars are becoming more expensive every year. Why not take advantage of this opportunity?
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: S703948
Year of Manufacture: 1977
Country of Manufacture: USA
Case: Hard Case
Accessories: Hard case key
Weight: 3.16 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.6 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 23.6 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Strap pins have been replaced, string retainer has been replaced, jack has been replaced with a domestic part.
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling
Other: The holes for the two original string retainers have been filled, and new string retainers have been installed on the 1st and 2nd strings.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$8.04
[SN S703948] USED Fender / Musicmaster Black 1977 [10]—
$8.04
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A guitar that truly captures the distinctive bite of a vintage Fender!
The 1977 Musicmaster in Black has arrived!
The straightforward sound is a hallmark of its simple 1-pickup, 1-volume, 1-tone circuit
It delivers solid low-end punch and a sound that completely avoids the lackluster quality often associated with short-scale guitars. Truly a vintage Fender through and through.
Based on the pot dates, these were manufactured in 1977, and both are original.
The serial number on the pickguard matches the body, and aside from the jack, strap pins, and string retainer, everything else appears to be original.
There are some stickers on the back of the body and a paint chip on the right edge caused by an impact mark, but it has been cleaned and set up and is in pristine condition.
Vintage Fender guitars are becoming more expensive every year. Why not take advantage of this opportunity?
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: S703948
Year of Manufacture: 1977
Country of Manufacture: USA
Case: Hard Case
Accessories: Hard case key
Weight: 3.16 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.6 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 23.6 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Strap pins have been replaced, string retainer has been replaced, jack has been replaced with a domestic part.
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling
Other: The holes for the two original string retainers have been filled, and new string retainers have been installed on the 1st and 2nd strings.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The 1977 Musicmaster in Black has arrived!
The straightforward sound is a hallmark of its simple 1-pickup, 1-volume, 1-tone circuit
It delivers solid low-end punch and a sound that completely avoids the lackluster quality often associated with short-scale guitars. Truly a vintage Fender through and through.
Based on the pot dates, these were manufactured in 1977, and both are original.
The serial number on the pickguard matches the body, and aside from the jack, strap pins, and string retainer, everything else appears to be original.
There are some stickers on the back of the body and a paint chip on the right edge caused by an impact mark, but it has been cleaned and set up and is in pristine condition.
Vintage Fender guitars are becoming more expensive every year. Why not take advantage of this opportunity?
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: S703948
Year of Manufacture: 1977
Country of Manufacture: USA
Case: Hard Case
Accessories: Hard case key
Weight: 3.16 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.6 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 23.6 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Strap pins have been replaced, string retainer has been replaced, jack has been replaced with a domestic part.
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling
Other: The holes for the two original string retainers have been filled, and new string retainers have been installed on the 1st and 2nd strings.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
