š Up to 70% Off Selected ItemsShop Sale
USED Fernandes / RG-80 Black [12]
The Fernandes RG-80 has arrived!
A replica model of a certain R-brand guitar.
Itās based on a model used by a legendary rock star.
The body and neck are made of maple, and the fingerboard is, of course, rosewood with a gloss finish.
It features a 21-inch ultra-short scale.
The control section is just like the original, featuring the distinctive circuit layout of 2 volume controls, 2 tone controls, and a balancer knob.
It appears to be a model from the late 1980s or later and is a very well-crafted instrument.
Although the neck is slightly warped, the frets have been leveled, so there is currently no muting.
Two of the knob top plates are missing.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: Japan
Case: Soft case
Weight: 2.81 kg
Truss Rod: Checked up to 60 degrees to the left and right; no issues (slight twist present)
Fret Wear: Fret height is sufficient for playable conditions
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 40.3 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 525 mm (20.66")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
A replica model of a certain R-brand guitar.
Itās based on a model used by a legendary rock star.
The body and neck are made of maple, and the fingerboard is, of course, rosewood with a gloss finish.
It features a 21-inch ultra-short scale.
The control section is just like the original, featuring the distinctive circuit layout of 2 volume controls, 2 tone controls, and a balancer knob.
It appears to be a model from the late 1980s or later and is a very well-crafted instrument.
Although the neck is slightly warped, the frets have been leveled, so there is currently no muting.
Two of the knob top plates are missing.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: Japan
Case: Soft case
Weight: 2.81 kg
Truss Rod: Checked up to 60 degrees to the left and right; no issues (slight twist present)
Fret Wear: Fret height is sufficient for playable conditions
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 40.3 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 525 mm (20.66")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
$1.65
Original: $4.72
-65%USED Fernandes / RG-80 Black [12]ā
$4.72
$1.65Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fernandes RG-80 has arrived!
A replica model of a certain R-brand guitar.
Itās based on a model used by a legendary rock star.
The body and neck are made of maple, and the fingerboard is, of course, rosewood with a gloss finish.
It features a 21-inch ultra-short scale.
The control section is just like the original, featuring the distinctive circuit layout of 2 volume controls, 2 tone controls, and a balancer knob.
It appears to be a model from the late 1980s or later and is a very well-crafted instrument.
Although the neck is slightly warped, the frets have been leveled, so there is currently no muting.
Two of the knob top plates are missing.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: Japan
Case: Soft case
Weight: 2.81 kg
Truss Rod: Checked up to 60 degrees to the left and right; no issues (slight twist present)
Fret Wear: Fret height is sufficient for playable conditions
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 40.3 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 525 mm (20.66")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
A replica model of a certain R-brand guitar.
Itās based on a model used by a legendary rock star.
The body and neck are made of maple, and the fingerboard is, of course, rosewood with a gloss finish.
It features a 21-inch ultra-short scale.
The control section is just like the original, featuring the distinctive circuit layout of 2 volume controls, 2 tone controls, and a balancer knob.
It appears to be a model from the late 1980s or later and is a very well-crafted instrument.
Although the neck is slightly warped, the frets have been leveled, so there is currently no muting.
Two of the knob top plates are missing.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: Japan
Case: Soft case
Weight: 2.81 kg
Truss Rod: Checked up to 60 degrees to the left and right; no issues (slight twist present)
Fret Wear: Fret height is sufficient for playable conditions
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 40.3 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 525 mm (20.66")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
