š Up to 70% Off Selected ItemsShop Sale
[SN D863982] USED Ibanez / IMG2010 [12]
Weāve just received a super-rare MIDI-compatible guitar made by Ibanez.
Manufactured for only two years, from 1985 to 1986, this model is packed with cutting-edge features of the time, including a headless design, bridge tuning, a compact body, and MIDI compatibility.
It features a maple body, maple neck, and ebony fingerboard, and is equipped with two original covered humbuckers.
A dedicated MIDI OUT cable is included; however, please note that neither the cable nor the MIDI control functions have been tested.
Although the tremolo arm is missing, even if one were attached to the bridge, the mechanism is designed such that only the MIDI pitch bend control would function; the tremolo unit itself does not physically move up or down.
There are scattered fine scratches and dents throughout the guitar, and the hardware shows some tarnish; however, the logo on the body has minimal wear, and the control knobsā clear plates are intact, making this a well-preserved instrument.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: D863982
Year of Manufacture: 1986
Country of Manufacture: Japan
Case: Hard case
Accessories: 24-pin cable (not checked)
Weight: 4.35 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.7 mm
Neck thickness near the 1st fret: 19.7 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 406 mm (16")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
Manufactured for only two years, from 1985 to 1986, this model is packed with cutting-edge features of the time, including a headless design, bridge tuning, a compact body, and MIDI compatibility.
It features a maple body, maple neck, and ebony fingerboard, and is equipped with two original covered humbuckers.
A dedicated MIDI OUT cable is included; however, please note that neither the cable nor the MIDI control functions have been tested.
Although the tremolo arm is missing, even if one were attached to the bridge, the mechanism is designed such that only the MIDI pitch bend control would function; the tremolo unit itself does not physically move up or down.
There are scattered fine scratches and dents throughout the guitar, and the hardware shows some tarnish; however, the logo on the body has minimal wear, and the control knobsā clear plates are intact, making this a well-preserved instrument.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: D863982
Year of Manufacture: 1986
Country of Manufacture: Japan
Case: Hard case
Accessories: 24-pin cable (not checked)
Weight: 4.35 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.7 mm
Neck thickness near the 1st fret: 19.7 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 406 mm (16")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
$1.94
Original: $5.53
-65%[SN D863982] USED Ibanez / IMG2010 [12]ā
$5.53
$1.94Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Weāve just received a super-rare MIDI-compatible guitar made by Ibanez.
Manufactured for only two years, from 1985 to 1986, this model is packed with cutting-edge features of the time, including a headless design, bridge tuning, a compact body, and MIDI compatibility.
It features a maple body, maple neck, and ebony fingerboard, and is equipped with two original covered humbuckers.
A dedicated MIDI OUT cable is included; however, please note that neither the cable nor the MIDI control functions have been tested.
Although the tremolo arm is missing, even if one were attached to the bridge, the mechanism is designed such that only the MIDI pitch bend control would function; the tremolo unit itself does not physically move up or down.
There are scattered fine scratches and dents throughout the guitar, and the hardware shows some tarnish; however, the logo on the body has minimal wear, and the control knobsā clear plates are intact, making this a well-preserved instrument.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: D863982
Year of Manufacture: 1986
Country of Manufacture: Japan
Case: Hard case
Accessories: 24-pin cable (not checked)
Weight: 4.35 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.7 mm
Neck thickness near the 1st fret: 19.7 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 406 mm (16")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
Manufactured for only two years, from 1985 to 1986, this model is packed with cutting-edge features of the time, including a headless design, bridge tuning, a compact body, and MIDI compatibility.
It features a maple body, maple neck, and ebony fingerboard, and is equipped with two original covered humbuckers.
A dedicated MIDI OUT cable is included; however, please note that neither the cable nor the MIDI control functions have been tested.
Although the tremolo arm is missing, even if one were attached to the bridge, the mechanism is designed such that only the MIDI pitch bend control would function; the tremolo unit itself does not physically move up or down.
There are scattered fine scratches and dents throughout the guitar, and the hardware shows some tarnish; however, the logo on the body has minimal wear, and the control knobsā clear plates are intact, making this a well-preserved instrument.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: D863982
Year of Manufacture: 1986
Country of Manufacture: Japan
Case: Hard case
Accessories: 24-pin cable (not checked)
Weight: 4.35 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.7 mm
Neck thickness near the 1st fret: 19.7 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 406 mm (16")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
