š Up to 70% Off Selected ItemsShop Sale
[SN V2558975] USED Fender / FSR Limited American Vintage II 1966 Jazzmaster Black [12]
The 1966 Jazzmaster from the American Vintage II Limited Edition series is now in stock!
Featuring a satin-finished 3A flame maple neck and equipped with "Fender Custom Shop Single-Coil Jazzmaster" pickups, this cool model boasts a matching headstock and a sleek black finish.
Otherwise, it matches the standard specifications, faithfully reflecting the original 1966 design with the body shape, neck, hardware configuration, and a round-edged rosewood fingerboard with binding and pearl block inlays, as well as "witch hat" control knobs. It also faithfully reproduces the playability of the era with vintage tall frets and a 7.25-inch fingerboard radius.
There are overall scuffs and fine scratches, and there is a dent on the side of the body.
The frets show almost no wear, the neck is in good condition, and the truss rod is adjustable.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: V2558975
Year of Manufacture: 2025
Country of Manufacture: USA
Case: Original hard case
Accessories: Arm and bridge covers
Weight: 3.54 kg
Truss Rod: Tested to 60 degrees in both directions; no issues found
Fret Wear: Fret height is sufficient for playable condition
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.5 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Featuring a satin-finished 3A flame maple neck and equipped with "Fender Custom Shop Single-Coil Jazzmaster" pickups, this cool model boasts a matching headstock and a sleek black finish.
Otherwise, it matches the standard specifications, faithfully reflecting the original 1966 design with the body shape, neck, hardware configuration, and a round-edged rosewood fingerboard with binding and pearl block inlays, as well as "witch hat" control knobs. It also faithfully reproduces the playability of the era with vintage tall frets and a 7.25-inch fingerboard radius.
There are overall scuffs and fine scratches, and there is a dent on the side of the body.
The frets show almost no wear, the neck is in good condition, and the truss rod is adjustable.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: V2558975
Year of Manufacture: 2025
Country of Manufacture: USA
Case: Original hard case
Accessories: Arm and bridge covers
Weight: 3.54 kg
Truss Rod: Tested to 60 degrees in both directions; no issues found
Fret Wear: Fret height is sufficient for playable condition
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.5 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$4.74
Original: $13.53
-65%[SN V2558975] USED Fender / FSR Limited American Vintage II 1966 Jazzmaster Black [12]ā
$13.53
$4.74Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The 1966 Jazzmaster from the American Vintage II Limited Edition series is now in stock!
Featuring a satin-finished 3A flame maple neck and equipped with "Fender Custom Shop Single-Coil Jazzmaster" pickups, this cool model boasts a matching headstock and a sleek black finish.
Otherwise, it matches the standard specifications, faithfully reflecting the original 1966 design with the body shape, neck, hardware configuration, and a round-edged rosewood fingerboard with binding and pearl block inlays, as well as "witch hat" control knobs. It also faithfully reproduces the playability of the era with vintage tall frets and a 7.25-inch fingerboard radius.
There are overall scuffs and fine scratches, and there is a dent on the side of the body.
The frets show almost no wear, the neck is in good condition, and the truss rod is adjustable.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: V2558975
Year of Manufacture: 2025
Country of Manufacture: USA
Case: Original hard case
Accessories: Arm and bridge covers
Weight: 3.54 kg
Truss Rod: Tested to 60 degrees in both directions; no issues found
Fret Wear: Fret height is sufficient for playable condition
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.5 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Featuring a satin-finished 3A flame maple neck and equipped with "Fender Custom Shop Single-Coil Jazzmaster" pickups, this cool model boasts a matching headstock and a sleek black finish.
Otherwise, it matches the standard specifications, faithfully reflecting the original 1966 design with the body shape, neck, hardware configuration, and a round-edged rosewood fingerboard with binding and pearl block inlays, as well as "witch hat" control knobs. It also faithfully reproduces the playability of the era with vintage tall frets and a 7.25-inch fingerboard radius.
There are overall scuffs and fine scratches, and there is a dent on the side of the body.
The frets show almost no wear, the neck is in good condition, and the truss rod is adjustable.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: V2558975
Year of Manufacture: 2025
Country of Manufacture: USA
Case: Original hard case
Accessories: Arm and bridge covers
Weight: 3.54 kg
Truss Rod: Tested to 60 degrees in both directions; no issues found
Fret Wear: Fret height is sufficient for playable condition
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.5 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
