🎉 Up to 70% Off Selected ItemsShop Sale
[SN X24015S] USED Dragonfly / BORDER 666 SQUEEZE Blue Djent [12]
A limited-edition model with a wrap finish!
The Border 666 features an original design focused on playability.
While the body features a traditional flat-top design, the contoured sections are finished with smooth curves to reduce stress on the area where the elbow rests.
The 666 scale is 18 mm longer than the standard long scale (648 mm), which maintains string tension even when tuning down to lower pitches, resulting in a tight, powerful low-end.
It is equipped with the original HAF-N and HAF-B pickups, which offer a clear sound and a wide frequency range.
The Dragonfly control, which utilizes high- and low-pass filters, allows you to cut high and low frequencies with a single control.
The stainless steel frets are highly resistant to wear and contribute to a sound with a quick attack.
It shows minimal signs of use, with only minor scratches, and is in excellent condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: X24015S
Year of Manufacture: 2024
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.64 kg
Truss Rod: Tested to 60 degrees left and right; no issues found
Remaining Fret Height: Fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 666 mm (26.2")
Radius: 305 mm (12")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
The Border 666 features an original design focused on playability.
While the body features a traditional flat-top design, the contoured sections are finished with smooth curves to reduce stress on the area where the elbow rests.
The 666 scale is 18 mm longer than the standard long scale (648 mm), which maintains string tension even when tuning down to lower pitches, resulting in a tight, powerful low-end.
It is equipped with the original HAF-N and HAF-B pickups, which offer a clear sound and a wide frequency range.
The Dragonfly control, which utilizes high- and low-pass filters, allows you to cut high and low frequencies with a single control.
The stainless steel frets are highly resistant to wear and contribute to a sound with a quick attack.
It shows minimal signs of use, with only minor scratches, and is in excellent condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: X24015S
Year of Manufacture: 2024
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.64 kg
Truss Rod: Tested to 60 degrees left and right; no issues found
Remaining Fret Height: Fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 666 mm (26.2")
Radius: 305 mm (12")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
$2.53
Original: $7.23
-65%[SN X24015S] USED Dragonfly / BORDER 666 SQUEEZE Blue Djent [12]—
$7.23
$2.53Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A limited-edition model with a wrap finish!
The Border 666 features an original design focused on playability.
While the body features a traditional flat-top design, the contoured sections are finished with smooth curves to reduce stress on the area where the elbow rests.
The 666 scale is 18 mm longer than the standard long scale (648 mm), which maintains string tension even when tuning down to lower pitches, resulting in a tight, powerful low-end.
It is equipped with the original HAF-N and HAF-B pickups, which offer a clear sound and a wide frequency range.
The Dragonfly control, which utilizes high- and low-pass filters, allows you to cut high and low frequencies with a single control.
The stainless steel frets are highly resistant to wear and contribute to a sound with a quick attack.
It shows minimal signs of use, with only minor scratches, and is in excellent condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: X24015S
Year of Manufacture: 2024
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.64 kg
Truss Rod: Tested to 60 degrees left and right; no issues found
Remaining Fret Height: Fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 666 mm (26.2")
Radius: 305 mm (12")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
The Border 666 features an original design focused on playability.
While the body features a traditional flat-top design, the contoured sections are finished with smooth curves to reduce stress on the area where the elbow rests.
The 666 scale is 18 mm longer than the standard long scale (648 mm), which maintains string tension even when tuning down to lower pitches, resulting in a tight, powerful low-end.
It is equipped with the original HAF-N and HAF-B pickups, which offer a clear sound and a wide frequency range.
The Dragonfly control, which utilizes high- and low-pass filters, allows you to cut high and low frequencies with a single control.
The stainless steel frets are highly resistant to wear and contribute to a sound with a quick attack.
It shows minimal signs of use, with only minor scratches, and is in excellent condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: X24015S
Year of Manufacture: 2024
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.64 kg
Truss Rod: Tested to 60 degrees left and right; no issues found
Remaining Fret Height: Fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 666 mm (26.2")
Radius: 305 mm (12")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
