🎉 Up to 70% Off Selected ItemsShop Sale
[SN G230227] USED FUJIGEN / J-Standard ILIAD JIL2-AL-R-HH Black [12]
FUJIGEN / JIL2-AL-R-HH is now in stock!
The J-Standard ILIAD (JIL for short) is a T-style guitar that retains traditional elements while incorporating various modern specifications to accommodate a wide range of genres.
This model features an alder body and a rosewood fingerboard.
The back of the body is contoured for a better fit against the body.
It’s equipped with classic Seymour Duncan pickups (SH-1N in the front, TB-4 in the back).
It also features coil-tapping, making it versatile for a wide range of genres and performance situations.
While the frets are still playable, their height is currently about 50–60% of their original height.
There is a chip on the fretboard edge at the 2nd–3rd frets on the 6th string side. While this is not expected to significantly affect playability, please be aware of this condition.
The jack plate has been replaced, and the screw holes have been re-drilled accordingly.
The entire body has dents and scratches accompanied by significant paint peeling, and it shows heavy signs of wear.
In addition, there are scattered minor scratches and dents throughout the body, and the hardware shows some tarnish.
The instrument has been fully serviced and cleaned at our repair center, and playability is good.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: G230227
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.61 kg
Truss Rod: Tested to move 60 degrees in both directions; no issues
Fret Wear: Still playable but frets are on the low side
String height (low-string side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
Radius: 356 mm (14")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
The J-Standard ILIAD (JIL for short) is a T-style guitar that retains traditional elements while incorporating various modern specifications to accommodate a wide range of genres.
This model features an alder body and a rosewood fingerboard.
The back of the body is contoured for a better fit against the body.
It’s equipped with classic Seymour Duncan pickups (SH-1N in the front, TB-4 in the back).
It also features coil-tapping, making it versatile for a wide range of genres and performance situations.
While the frets are still playable, their height is currently about 50–60% of their original height.
There is a chip on the fretboard edge at the 2nd–3rd frets on the 6th string side. While this is not expected to significantly affect playability, please be aware of this condition.
The jack plate has been replaced, and the screw holes have been re-drilled accordingly.
The entire body has dents and scratches accompanied by significant paint peeling, and it shows heavy signs of wear.
In addition, there are scattered minor scratches and dents throughout the body, and the hardware shows some tarnish.
The instrument has been fully serviced and cleaned at our repair center, and playability is good.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: G230227
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.61 kg
Truss Rod: Tested to move 60 degrees in both directions; no issues
Fret Wear: Still playable but frets are on the low side
String height (low-string side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
Radius: 356 mm (14")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
$4.46
[SN G230227] USED FUJIGEN / J-Standard ILIAD JIL2-AL-R-HH Black [12]—
$4.46
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
FUJIGEN / JIL2-AL-R-HH is now in stock!
The J-Standard ILIAD (JIL for short) is a T-style guitar that retains traditional elements while incorporating various modern specifications to accommodate a wide range of genres.
This model features an alder body and a rosewood fingerboard.
The back of the body is contoured for a better fit against the body.
It’s equipped with classic Seymour Duncan pickups (SH-1N in the front, TB-4 in the back).
It also features coil-tapping, making it versatile for a wide range of genres and performance situations.
While the frets are still playable, their height is currently about 50–60% of their original height.
There is a chip on the fretboard edge at the 2nd–3rd frets on the 6th string side. While this is not expected to significantly affect playability, please be aware of this condition.
The jack plate has been replaced, and the screw holes have been re-drilled accordingly.
The entire body has dents and scratches accompanied by significant paint peeling, and it shows heavy signs of wear.
In addition, there are scattered minor scratches and dents throughout the body, and the hardware shows some tarnish.
The instrument has been fully serviced and cleaned at our repair center, and playability is good.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: G230227
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.61 kg
Truss Rod: Tested to move 60 degrees in both directions; no issues
Fret Wear: Still playable but frets are on the low side
String height (low-string side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
Radius: 356 mm (14")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
The J-Standard ILIAD (JIL for short) is a T-style guitar that retains traditional elements while incorporating various modern specifications to accommodate a wide range of genres.
This model features an alder body and a rosewood fingerboard.
The back of the body is contoured for a better fit against the body.
It’s equipped with classic Seymour Duncan pickups (SH-1N in the front, TB-4 in the back).
It also features coil-tapping, making it versatile for a wide range of genres and performance situations.
While the frets are still playable, their height is currently about 50–60% of their original height.
There is a chip on the fretboard edge at the 2nd–3rd frets on the 6th string side. While this is not expected to significantly affect playability, please be aware of this condition.
The jack plate has been replaced, and the screw holes have been re-drilled accordingly.
The entire body has dents and scratches accompanied by significant paint peeling, and it shows heavy signs of wear.
In addition, there are scattered minor scratches and dents throughout the body, and the hardware shows some tarnish.
The instrument has been fully serviced and cleaned at our repair center, and playability is good.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: G230227
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.61 kg
Truss Rod: Tested to move 60 degrees in both directions; no issues
Fret Wear: Still playable but frets are on the low side
String height (low-string side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
Radius: 356 mm (14")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
