🎉 Up to 70% Off Selected ItemsShop Sale
[SN 032615] USED T's Guitars / DST-DX22 Trans-Blue Denim [12]
The DST-DX22, one of T's Guitars' signature models, has arrived.
This is a standard model from T's Guitars, a guitar workshop that handcrafts high-quality electric guitars in a workshop in Nagano Prefecture.
It features a body made of Honduran mahogany back and selected flame maple top, paired with a maple neck and rosewood fingerboard with 22 frets.
The slightly smaller “Dinky” body shape is lightweight and easy to handle, and with its slim C-shaped neck profile and 12-inch fingerboard radius, this model offers exceptional playability.
All pickups are original models, featuring two PAF-type DH-250s with Alnico 2 magnets.
The 5-way blade switch also allows you to tap the humbucker in the half position to produce a single-coil sound.
Designed to maximize the sound of the two humbuckers while retaining the DST shape.
The Honduran mahogany back of the body delivers a rich tone and powerful projection.
It shows minimal signs of use, with only minor scratches, and is in excellent condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: 032615
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Tonearm, Certificate of Authenticity
Weight: 3.71 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 305 mm (12")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
This is a standard model from T's Guitars, a guitar workshop that handcrafts high-quality electric guitars in a workshop in Nagano Prefecture.
It features a body made of Honduran mahogany back and selected flame maple top, paired with a maple neck and rosewood fingerboard with 22 frets.
The slightly smaller “Dinky” body shape is lightweight and easy to handle, and with its slim C-shaped neck profile and 12-inch fingerboard radius, this model offers exceptional playability.
All pickups are original models, featuring two PAF-type DH-250s with Alnico 2 magnets.
The 5-way blade switch also allows you to tap the humbucker in the half position to produce a single-coil sound.
Designed to maximize the sound of the two humbuckers while retaining the DST shape.
The Honduran mahogany back of the body delivers a rich tone and powerful projection.
It shows minimal signs of use, with only minor scratches, and is in excellent condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: 032615
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Tonearm, Certificate of Authenticity
Weight: 3.71 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 305 mm (12")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$13.13
[SN 032615] USED T's Guitars / DST-DX22 Trans-Blue Denim [12]—
$13.13
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The DST-DX22, one of T's Guitars' signature models, has arrived.
This is a standard model from T's Guitars, a guitar workshop that handcrafts high-quality electric guitars in a workshop in Nagano Prefecture.
It features a body made of Honduran mahogany back and selected flame maple top, paired with a maple neck and rosewood fingerboard with 22 frets.
The slightly smaller “Dinky” body shape is lightweight and easy to handle, and with its slim C-shaped neck profile and 12-inch fingerboard radius, this model offers exceptional playability.
All pickups are original models, featuring two PAF-type DH-250s with Alnico 2 magnets.
The 5-way blade switch also allows you to tap the humbucker in the half position to produce a single-coil sound.
Designed to maximize the sound of the two humbuckers while retaining the DST shape.
The Honduran mahogany back of the body delivers a rich tone and powerful projection.
It shows minimal signs of use, with only minor scratches, and is in excellent condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: 032615
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Tonearm, Certificate of Authenticity
Weight: 3.71 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 305 mm (12")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
This is a standard model from T's Guitars, a guitar workshop that handcrafts high-quality electric guitars in a workshop in Nagano Prefecture.
It features a body made of Honduran mahogany back and selected flame maple top, paired with a maple neck and rosewood fingerboard with 22 frets.
The slightly smaller “Dinky” body shape is lightweight and easy to handle, and with its slim C-shaped neck profile and 12-inch fingerboard radius, this model offers exceptional playability.
All pickups are original models, featuring two PAF-type DH-250s with Alnico 2 magnets.
The 5-way blade switch also allows you to tap the humbucker in the half position to produce a single-coil sound.
Designed to maximize the sound of the two humbuckers while retaining the DST shape.
The Honduran mahogany back of the body delivers a rich tone and powerful projection.
It shows minimal signs of use, with only minor scratches, and is in excellent condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: 032615
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Tonearm, Certificate of Authenticity
Weight: 3.71 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
RADIUS: 305 mm (12")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
