🎉 Up to 70% Off Selected ItemsShop Sale
[SN 22059] USED YAMAHA / SA-70 Sunburst [20]
A rare Yamaha semi-acoustic bass released between the late 1960s and early 1970s.
It is believed to feature a maple body, maple neck, and rosewood fingerboard.
It features a full-hollow body with a short scale and two humbucker pickups, producing a warm, rich sound.
The soundhole is sealed from the inside with a plastic-like material to prevent feedback. (This is the original condition.)
The control knobs have been replaced, and the parts show signs of tarnish, rust, and peeling plating.
There are numerous small dents accompanied by dents and paint cracks on both sides of the body, as well as cracks and dents in the body corner binding.
There are strap pin hole marks at the neck joint, and there is paint chipping on the neck at the 1st fret on the 1st string side.
There are scratches and dents throughout the instrument.
The included hard case has peeling exterior and one hinge has been replaced.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 22059
Country of Manufacture: Japan
Case: Genuine hard case
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String height (low string side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 41.5 mm
Strings at setup: D'Addario EXL160M / .050-.105 set
Repairs/Maintenance: Neck straightening, fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: Some bridge parts are missing
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It is believed to feature a maple body, maple neck, and rosewood fingerboard.
It features a full-hollow body with a short scale and two humbucker pickups, producing a warm, rich sound.
The soundhole is sealed from the inside with a plastic-like material to prevent feedback. (This is the original condition.)
The control knobs have been replaced, and the parts show signs of tarnish, rust, and peeling plating.
There are numerous small dents accompanied by dents and paint cracks on both sides of the body, as well as cracks and dents in the body corner binding.
There are strap pin hole marks at the neck joint, and there is paint chipping on the neck at the 1st fret on the 1st string side.
There are scratches and dents throughout the instrument.
The included hard case has peeling exterior and one hinge has been replaced.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 22059
Country of Manufacture: Japan
Case: Genuine hard case
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String height (low string side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 41.5 mm
Strings at setup: D'Addario EXL160M / .050-.105 set
Repairs/Maintenance: Neck straightening, fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: Some bridge parts are missing
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$2.81
Original: $8.04
-65%[SN 22059] USED YAMAHA / SA-70 Sunburst [20]—
$8.04
$2.81Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A rare Yamaha semi-acoustic bass released between the late 1960s and early 1970s.
It is believed to feature a maple body, maple neck, and rosewood fingerboard.
It features a full-hollow body with a short scale and two humbucker pickups, producing a warm, rich sound.
The soundhole is sealed from the inside with a plastic-like material to prevent feedback. (This is the original condition.)
The control knobs have been replaced, and the parts show signs of tarnish, rust, and peeling plating.
There are numerous small dents accompanied by dents and paint cracks on both sides of the body, as well as cracks and dents in the body corner binding.
There are strap pin hole marks at the neck joint, and there is paint chipping on the neck at the 1st fret on the 1st string side.
There are scratches and dents throughout the instrument.
The included hard case has peeling exterior and one hinge has been replaced.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 22059
Country of Manufacture: Japan
Case: Genuine hard case
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String height (low string side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 41.5 mm
Strings at setup: D'Addario EXL160M / .050-.105 set
Repairs/Maintenance: Neck straightening, fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: Some bridge parts are missing
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It is believed to feature a maple body, maple neck, and rosewood fingerboard.
It features a full-hollow body with a short scale and two humbucker pickups, producing a warm, rich sound.
The soundhole is sealed from the inside with a plastic-like material to prevent feedback. (This is the original condition.)
The control knobs have been replaced, and the parts show signs of tarnish, rust, and peeling plating.
There are numerous small dents accompanied by dents and paint cracks on both sides of the body, as well as cracks and dents in the body corner binding.
There are strap pin hole marks at the neck joint, and there is paint chipping on the neck at the 1st fret on the 1st string side.
There are scratches and dents throughout the instrument.
The included hard case has peeling exterior and one hinge has been replaced.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 22059
Country of Manufacture: Japan
Case: Genuine hard case
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String height (low string side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 41.5 mm
Strings at setup: D'Addario EXL160M / .050-.105 set
Repairs/Maintenance: Neck straightening, fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: Some bridge parts are missing
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
