🎉 Up to 70% Off Selected ItemsShop Sale
[SN E635637] USED SQUIER / Made in Japan CST-30 3-Tone Sunburst [20]
Japanese-made Squier Stratocaster “CST-30” from the E-serial era
In 1983, the year after Fender Japan was officially established, Squier—a Japanese-made guitar—made its debut as a sister brand to Fender Japan.
With a two-piece alder body, rosewood fingerboard, large headstock, bullet truss rod, and a three-point neck joint, among other features, this guitar is the quintessential 1970s Stratocaster.
The backplate is missing, and the parts show signs of tarnish, rust, and peeling plating.
There are numerous small dents, along with paint chips, cracks, and dents on the headstock corners and across the entire body.
There are also general scuffs and dents throughout the guitar.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: E635637
Year of Manufacture: 1986
Country of Manufacture: Japan
Case: Non-original hard case
Accessories: Tonearm
Weight: 3.63 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Remaining Fret Height: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Strings at Setup: / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
In 1983, the year after Fender Japan was officially established, Squier—a Japanese-made guitar—made its debut as a sister brand to Fender Japan.
With a two-piece alder body, rosewood fingerboard, large headstock, bullet truss rod, and a three-point neck joint, among other features, this guitar is the quintessential 1970s Stratocaster.
The backplate is missing, and the parts show signs of tarnish, rust, and peeling plating.
There are numerous small dents, along with paint chips, cracks, and dents on the headstock corners and across the entire body.
There are also general scuffs and dents throughout the guitar.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: E635637
Year of Manufacture: 1986
Country of Manufacture: Japan
Case: Non-original hard case
Accessories: Tonearm
Weight: 3.63 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Remaining Fret Height: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Strings at Setup: / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$0.90
Original: $2.56
-65%[SN E635637] USED SQUIER / Made in Japan CST-30 3-Tone Sunburst [20]—
$2.56
$0.90Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Japanese-made Squier Stratocaster “CST-30” from the E-serial era
In 1983, the year after Fender Japan was officially established, Squier—a Japanese-made guitar—made its debut as a sister brand to Fender Japan.
With a two-piece alder body, rosewood fingerboard, large headstock, bullet truss rod, and a three-point neck joint, among other features, this guitar is the quintessential 1970s Stratocaster.
The backplate is missing, and the parts show signs of tarnish, rust, and peeling plating.
There are numerous small dents, along with paint chips, cracks, and dents on the headstock corners and across the entire body.
There are also general scuffs and dents throughout the guitar.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: E635637
Year of Manufacture: 1986
Country of Manufacture: Japan
Case: Non-original hard case
Accessories: Tonearm
Weight: 3.63 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Remaining Fret Height: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Strings at Setup: / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
In 1983, the year after Fender Japan was officially established, Squier—a Japanese-made guitar—made its debut as a sister brand to Fender Japan.
With a two-piece alder body, rosewood fingerboard, large headstock, bullet truss rod, and a three-point neck joint, among other features, this guitar is the quintessential 1970s Stratocaster.
The backplate is missing, and the parts show signs of tarnish, rust, and peeling plating.
There are numerous small dents, along with paint chips, cracks, and dents on the headstock corners and across the entire body.
There are also general scuffs and dents throughout the guitar.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: E635637
Year of Manufacture: 1986
Country of Manufacture: Japan
Case: Non-original hard case
Accessories: Tonearm
Weight: 3.63 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Remaining Fret Height: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Strings at Setup: / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
