🎉 Up to 70% Off Selected ItemsShop Sale
[SN X19045S] USED DRAGONFLY / Border 666 Ash Body Black [20]
BORDER presents the Border 666, an original design focused on playability.
While the body features a traditional flat-top design, the contoured edges are finished with a smooth curve to reduce stress on the area where the elbow rests.
The 666 scale length is 18mm longer than the standard long scale (648mm), allowing string tension to be maintained even when tuning down, and producing a "tight" low-end sound.
It is equipped with original dfh-5n & dfh-5b pickups.
The Dragonfly control, which utilizes high- and low-pass filters, allows for high-frequency and low-frequency cut-off with a single control.
The standard frets are HYBRID-2 #214 made of cryogenically treated stainless steel.
There is paint chipping due to scuffing across the entire body.
Overall, there are signs of wear, such as scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: X19045S
Case: Non-original soft case
Accessories: None
Weight: 3.61 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String Height (Low String Side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
While the body features a traditional flat-top design, the contoured edges are finished with a smooth curve to reduce stress on the area where the elbow rests.
The 666 scale length is 18mm longer than the standard long scale (648mm), allowing string tension to be maintained even when tuning down, and producing a "tight" low-end sound.
It is equipped with original dfh-5n & dfh-5b pickups.
The Dragonfly control, which utilizes high- and low-pass filters, allows for high-frequency and low-frequency cut-off with a single control.
The standard frets are HYBRID-2 #214 made of cryogenically treated stainless steel.
There is paint chipping due to scuffing across the entire body.
Overall, there are signs of wear, such as scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: X19045S
Case: Non-original soft case
Accessories: None
Weight: 3.61 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String Height (Low String Side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
$2.25
Original: $6.43
-65%[SN X19045S] USED DRAGONFLY / Border 666 Ash Body Black [20]—
$6.43
$2.25Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
BORDER presents the Border 666, an original design focused on playability.
While the body features a traditional flat-top design, the contoured edges are finished with a smooth curve to reduce stress on the area where the elbow rests.
The 666 scale length is 18mm longer than the standard long scale (648mm), allowing string tension to be maintained even when tuning down, and producing a "tight" low-end sound.
It is equipped with original dfh-5n & dfh-5b pickups.
The Dragonfly control, which utilizes high- and low-pass filters, allows for high-frequency and low-frequency cut-off with a single control.
The standard frets are HYBRID-2 #214 made of cryogenically treated stainless steel.
There is paint chipping due to scuffing across the entire body.
Overall, there are signs of wear, such as scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: X19045S
Case: Non-original soft case
Accessories: None
Weight: 3.61 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String Height (Low String Side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
While the body features a traditional flat-top design, the contoured edges are finished with a smooth curve to reduce stress on the area where the elbow rests.
The 666 scale length is 18mm longer than the standard long scale (648mm), allowing string tension to be maintained even when tuning down, and producing a "tight" low-end sound.
It is equipped with original dfh-5n & dfh-5b pickups.
The Dragonfly control, which utilizes high- and low-pass filters, allows for high-frequency and low-frequency cut-off with a single control.
The standard frets are HYBRID-2 #214 made of cryogenically treated stainless steel.
There is paint chipping due to scuffing across the entire body.
Overall, there are signs of wear, such as scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: X19045S
Case: Non-original soft case
Accessories: None
Weight: 3.61 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String Height (Low String Side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
