🎉 Up to 70% Off Selected ItemsShop Sale
[SN HPY111E] USED YAMAHA / PAC1611MS Mike Stern Signature Natural [20]
Signature model by American guitarist Mike Stern
The body is made of ash, and the neck and fingerboard are made of maple.
It is equipped with a Seymour Duncan 59 pickup in the front and a Seymour Duncan Hot Rail pickup in the rear.
Yamaha’s proprietary “Initial Response Acceleration” technology delivers a rich, resonant tone reminiscent of a guitar that’s been played for many years.
There is a small dent with a wood indentation on the back corner of the headstock, and there are several dents on the back of the body accompanied by paint cracks and dents.
There is a small crack in the finish at the neck joint.
The parts show some discoloration and fine rust spots, and there are overall scratches and small dents.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: HPY111E
Year of Manufacture: 2019
Country of Manufacture: Japan
Case: Genuine gig bag
Weight: 3.27 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Height (Treble Side): 1.5 mm at the 12th fret
Nut width: 40.6 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The body is made of ash, and the neck and fingerboard are made of maple.
It is equipped with a Seymour Duncan 59 pickup in the front and a Seymour Duncan Hot Rail pickup in the rear.
Yamaha’s proprietary “Initial Response Acceleration” technology delivers a rich, resonant tone reminiscent of a guitar that’s been played for many years.
There is a small dent with a wood indentation on the back corner of the headstock, and there are several dents on the back of the body accompanied by paint cracks and dents.
There is a small crack in the finish at the neck joint.
The parts show some discoloration and fine rust spots, and there are overall scratches and small dents.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: HPY111E
Year of Manufacture: 2019
Country of Manufacture: Japan
Case: Genuine gig bag
Weight: 3.27 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Height (Treble Side): 1.5 mm at the 12th fret
Nut width: 40.6 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$8.36
[SN HPY111E] USED YAMAHA / PAC1611MS Mike Stern Signature Natural [20]—
$8.36
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Signature model by American guitarist Mike Stern
The body is made of ash, and the neck and fingerboard are made of maple.
It is equipped with a Seymour Duncan 59 pickup in the front and a Seymour Duncan Hot Rail pickup in the rear.
Yamaha’s proprietary “Initial Response Acceleration” technology delivers a rich, resonant tone reminiscent of a guitar that’s been played for many years.
There is a small dent with a wood indentation on the back corner of the headstock, and there are several dents on the back of the body accompanied by paint cracks and dents.
There is a small crack in the finish at the neck joint.
The parts show some discoloration and fine rust spots, and there are overall scratches and small dents.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: HPY111E
Year of Manufacture: 2019
Country of Manufacture: Japan
Case: Genuine gig bag
Weight: 3.27 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Height (Treble Side): 1.5 mm at the 12th fret
Nut width: 40.6 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The body is made of ash, and the neck and fingerboard are made of maple.
It is equipped with a Seymour Duncan 59 pickup in the front and a Seymour Duncan Hot Rail pickup in the rear.
Yamaha’s proprietary “Initial Response Acceleration” technology delivers a rich, resonant tone reminiscent of a guitar that’s been played for many years.
There is a small dent with a wood indentation on the back corner of the headstock, and there are several dents on the back of the body accompanied by paint cracks and dents.
There is a small crack in the finish at the neck joint.
The parts show some discoloration and fine rust spots, and there are overall scratches and small dents.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: HPY111E
Year of Manufacture: 2019
Country of Manufacture: Japan
Case: Genuine gig bag
Weight: 3.27 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Height (Treble Side): 1.5 mm at the 12th fret
Nut width: 40.6 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
